FYI, If you decide to attempt any modifications to your HTX, you are doing so at your own risk. HTX Owners Manual HTX/Albrecht AE Service. Update*** I’m still doing this repair for those who may need it. Here are the specifics. I charge a flat fee of $35 which includes the new mic cord, the. Cat. No. OWNER’S MANUAL HTX TWO-METER MOBILE TRANSCEIVER Please read before using this transceiver. INTRODUCTION Your .
|Published (Last):||21 December 2007|
|PDF File Size:||20.93 Mb|
|ePub File Size:||7.67 Mb|
|Price:||Free* [*Free Regsitration Required]|
I had to replace the microphone cable if I wanted to continue to use the radio. Release PTT to listen for a reply. It has 10 DTMF memories which can each hold up to 15 digits for quick transmission. When it detects a transmission, it checks all memories to see if that frequency is already stored. To turn off the alert function, press F then ALT again.
Press T-SQL a third time to turn off both subaudible tone transmit and squelch. Then press and hold MR for at least 1 second.
After the transmission, DTMF squelch is still turned on. Follow these steps to change the scanning range. The default range is Tuning to a Frequency. You can also use one of the VFOs as a repeater input frequency and the other as a repeater output frequency for odd-split repeaters. Flashes after you hold Mxnual for at least 1 second. The HTX scans between the lower and upper scan limits.
Clearing a Memory Channel. Using Group Calling Group calling lets you page several users at once. To use group calling, every person in the group selects the same first three digits as their DTMF page sequence. If you would like for me to do this repair for you, you can click here! This setting does not affect frequencies already stored in memory.
Be sure T-SQL is not on the display.
Believe it htx-2252 not, but the microphone was still working at the time. If turning the HTX off then back on does not correct this error, take it to your local Radio Shack store to arrange for service. You might need to connect the red wire directly to the battery if you experience ignition noise.
Follow these steps to turn this option on or off. Follow these steps to turn off this keytone beep.
Either way you would like for the transaction to take place is fine with me. Using the Menu—lists the options in the configuration menu and gives the page numbers where the options are discussed.
Vehicle cables and mounting hardware are sup- plied. Specifica- tions are subject to change and improvement without notice. Slide the microphone onto the microphone holder.
Use an 8-ohm communications or PA speaker that can handle 5 or more watts of power such as Radio Shack Cat. The new frequency ranges are: Individually Programmable Repeater Offsets —let you program different repeater offset frequencies for each memory, and a default repeater offset for manually-tuned frequencies.
Follow these steps to turn on auto send.
Time-out option sets whether the HTX limits transmissions. Better than —65dB Deviation Getting a license is easier than ever. For example, if these sequences are assigned to a group: The transceiver stops on each active frequency for 5 seconds if squelch is on. When a repeater uses a subaudible tone, ntx-252 does not react to any transmission that does not include that tone. The previous sections included procedures that access this menu—this section provides an overview.
If the tones match, it operates as if it received the entire sequence. A repeater is a station that receives signals on one frequency the input frequency and then retransmits them on a different frequency the output frequency.
Each user must have a transceiver that has this feature. Setting the Scan Resume Delay When you set the scan resume condition to cr carrierthe HTX resumes scanning after the carrier drops. Press F, then press MR.